Software
Upgrade -
The current software upgrade follows the NCE Upgrade
Policy as stated
Click Here.
The Upgrades are FREE to customers
who bought our system(s) between January 1, 2007 and June 31, 2007.
They must send us the system registration card and a copy of their
receipt for the free upgrade.
Dealers should call NCE (585) 671-7478
to place an order to upgrade your in-stock systems.
EB1
New
is the EB1. Short circuit protection for one power district. These
should be available mid April. MSRP is $29.95
- All Solid State Operation:
No relay
- Boost for Low Power Systems: Helps reset low power output
systems.
- Over Voltage Protection: Over voltage protection on the
track caused by a DCC system failure or other power inputs.
- Adjustable
Range of Current Trip Setting: The currents can be adjusted over a
range of 2.25 to 8.0 Amp.
- Manual or Automatic Reset: Automatic reset
of the breaker after 2 seconds. A switch or Accessory Command
can be used for a manual reset.
- Power On/Off by DCC: Turn on/off
output track power with your DCC throttle.
- Output for LED Indicators:
LEDs can be used to monitor the power and status.
- System Reset: A
single command sets all CVs to original EB1 factory values.
